PH Reader
How to turn on the PH reader
Hold the power button.
Screen will show P1, press the power button again to confirm Program.
Screen will now show the PH reading as well as the temperature reading.
How to connect the PH reader
With the PH reader turned on, click on the Bluetooth probe connection icon top right of the Squizify platform.
Click scan and you should then see the PH reader which will have the format of SquizPH001, the exact name of your device will be on the box as well as the sticker on the device.
Once you click on the PH reader from the connection menu the Bluetooth probe connection icon will change from black to blue to signify it is connected.
When looking at tasks you will also see the probe icon on any temperature or PH field
How to send a reading from the PH reader to Squizify Tasks
Go to a task that requires temperature or PH values.
Click on the task field for Temperature or PH reading.
Once you bring up the reading pop up either click Capture on the Squizify platform or click the middle button on the PH reader.
Once clicked you can then move onto the next field.
How to Disconnect and Reconnect your PH reader
To disconnect simply turn the PH reader off by holding the power button.
To reconnect you can power the PH reader back on and it will automatically reconnect provided it was the most recent probe connected, if it does not reconnect within 5 seconds then follow the how to connect the PH reader steps again.
Updated on: 23/04/2025
Thank you!