Connecting your Bluetooth Temperature Probe
Squizify carries multiple styles of temperature probes, to order a compatible temperature probe contact your Customer Success Manager.
The process to connect these probes are the same for each style probe, you can download an A4 printable flyer here.
When connecting any Squizify bluetooth devices you will need to connect them via the Squizify app, if you attempt to connect them via the device bluetooth settings directly then the device may fail and need to be replaced.
Open the Squizify App
Click on the Thermometer icon in the top right corner of the screen
Make sure you are using the latest version of Android (13) and the Squizify App has Bluetooth and nearby devices permissions enabled.
Turn on the probe by pressing either the on button or opening the probe.
Sanitise the probes needle
This page will start scanning for a Bluetooth probe automatically
If it does not you can manually select the scan button
Once you see 'probe' on your screen, press the Pair Button
If the instrument does not pair with a device within 20 seconds, it will turn off until the power button is pressed again.
Navigate to any of the pages that require temperature reading. Click the probe icon on any row you wish to record and press capture.
Repeat this step for each temperature reading that is required for your daily checks
Remember to press save!
Turn off or close the probe and sanitise when you are finished.
The process to connect these probes are the same for each style probe, you can download an A4 printable flyer here.
When connecting any Squizify bluetooth devices you will need to connect them via the Squizify app, if you attempt to connect them via the device bluetooth settings directly then the device may fail and need to be replaced.
Connecting your bluetooth probe
Open the Squizify App
Click on the Thermometer icon in the top right corner of the screen
Make sure you are using the latest version of Android (13) and the Squizify App has Bluetooth and nearby devices permissions enabled.
Turn on the probe by pressing either the on button or opening the probe.
Sanitise the probes needle
This page will start scanning for a Bluetooth probe automatically
If it does not you can manually select the scan button
Once you see 'probe' on your screen, press the Pair Button
If the instrument does not pair with a device within 20 seconds, it will turn off until the power button is pressed again.
Navigate to any of the pages that require temperature reading. Click the probe icon on any row you wish to record and press capture.
Repeat this step for each temperature reading that is required for your daily checks
Remember to press save!
Turn off or close the probe and sanitise when you are finished.
Updated on: 16/09/2024
Thank you!